Hand pumps and accessories
Adapter for tank plastic Set consisting of adapter, screws, O-ring and fuel pumps
Chapel attachment set for manual pump incl. tube, filter, O-ring, fan
Casting for pump head, new version PMA1
Closure lid for filling nozzle of FLEXePUMP
Connector set, for pump head, since August 2006
Drain valve for Chapel manual pump, type JPTOB
Emergency hand pump for line installation without tank Material aluminium Volume 25 cm³ Pressure 200 bar Supplement for single acting cylinder
Gasket for pump closure for Series AL-HPR-HPT-HPV-06-12-25-45
Handwheel incl. Valve KIT - RUBINETTO POMPA "GH-HPR" - V08 + SFERA + GRN suitable for item 015001124/125
FLEXePUMP Manual and gear pump with lever Manual pump: 20ccm 150bar Gear pump: 1.5ccm 180bar Recommended rotation speed: 1000 - 1500 rpm Drive: hexagon nut 8mm incl. 5.5 litre mounted tank At least 18 volt cordless screwdriver. Don't use Hammer mode on your cordless screwdriver. About the cordless screwdriver to protect against overheating, the maximum switch-on time should not exceed 3 minutes Recommended oil qualities: Mineral hydraulic oil (HLP22 - HLP32 / ISO VG22 - 32)
Hydraulic manual pump double stroke aluminium case 5 litre plastic tank with over-pressure valve pump volume 22.5 mm² / stroke for double-acting hydraulic cylinder
Hydraulic manual pump double stroke aluminium case 5 litre plastic tank with over-pressure valve pump volume 22.5 mm² / stroke for single-acting hydraulic cylinder
Hydraulic manual pump double stroke aluminium case 2 litre plastic tank with over-pressure valve pump volume 22.5 mm² / stroke for single-acting hydraulic cylinder
Hydraulic manual pump double stroke aluminium case 2 litre plastic tank with over-pressure valve pump volume 22.5 mm² / stroke for double-acting hydraulic cylinder
Hydraulic manual pump double stroke aluminium case 5 litre plastic tank with over-pressure valve pump volume 25 mm² / stroke for single-acting hydraulic cylinder with release valve connection 12"L
Lever for pump head
Lever for pump, type LEVPM
Lid for oil filler plug, suitable for hydraulic manual pump (for our item-No. 015000200/201/205/206/207)
Manual pump double stroke, double-acting 150 bar pump volume 20 mm/3, tank capacity 8 litre
Manual pump double stroke, single-acting 160 bar pump volume 20 mm/3, tank capacity 8 litre
Manual pump single stroke, double-acting 150 bar pump volume 20 mm/3, tank capacity 8 litre
Manual pump, single stroke, single-acting 150 bar tank capacity 4 litre, with plastic tank
Plastic sealing for hydraulic tank
Pump head double stroke and double-acting pump volume 22.5 mm² / stroke