Diagnostic and control devices
- Load securing
- Trailer accessories
- Coupling heads
- Chassis
- Spare parts for wheel brakes
- Spare parts for overrun devices
-
Lighting & electrics
- Tail lights
- License plate lights
- Marker lights
- Side marker lights
- Reversing and fog lights
- Bulbs and festoon lights
- Reflectors
- Work lights
- Interior lights
- Rotating beacons
- Adapters
- Plugs and sockets
- Adapter and extension cables
- Power cables
- Power cords
- CEE products
- Marten repellents
- Battery chargers
- Voltage reducers
-
Diagnostic and control devices
- Spare parts for horse trailers
- Hinges and closures
- Winches
- Tool boxes
- Gas springs
- Hydraulics
- Loading ramps
- Tarp accessories
- Caravan and leisure
Filter products
–
Adapter control unit for LED light
13 pole plug to 7 pole socket
CAN-BUS
The function can be restricted depending on the control unit installed, but unfortunately it is not possible to predict this. There is no standard for this type of control unit. Each manufacturer works with different specifications, in addition to these are variables to individual years of manufacture.
Product number:
014001104
Adapter control unit for LED light
7-pin socket to 7-pin plug
CAN-BUS
The function can be restricted depending on the control unit installed, but unfortunately it is not possible to predict this. There is no standard for this type of control unit. Each manufacturer works with different specifications, in addition to these are variables to individual years of manufacture.
Product number:
014001109
Adapter control unit for LED light
13-pin socket to 13-pin plug
CAN-BUS
The function can be restricted depending on the control unit installed, but unfortunately it is not possible to predict this. There is no standard for this type of control unit. Each manufacturer works with different specifications, in addition to these are variables to individual years of manufacture.
Product number:
014001103
Adapter control unit for LED light
13-pin socket to 13-pin plug
Length 170 mm
Height 85 mm
Width 85 mm
Stock > 100
CAN bus
The function can be restricted depending on the control unit installed, but unfortunately it is not possible to predict this. There is no standard for this type of control unit. Each manufacturer works with different specifications, in addition to these are variables to individual years of manufacture.
Product number:
014001111
Combi-diagnostic device 7+13 pole trailer + towing vehicle
Break out box for trailer-socket at the towing vehicle & trailer
suitable for lightbulbs and LED
Operating voltage 12 V
Length connecting cable 4500 mm
for vehicles with and without CAN-bus system
Product number:
040023444
Control unit for 12 V LED light
helps to control 21 W functions, brake light, indicator light, reversing light, rear fog light and load resistance
cable 1.0 m
1 device per light
Product number:
014001075
Diagnostic device 7 pole, for trailer
This break out box enabled a review of the trailer- cable system incl. battery
Product number:
040023414
Diagnostic device 7-pole with 4 m cable
Break out box for trailer-socket at the towing vehicle 7 pole 12 V, for one person operation with 4 m cable
Product number:
040023441
LED Control Device
with an aluminum housing
Voltage 12-volt
Plug 13-pin
Socket 13-pin
Cable length 2500 mm
Product number:
014001084
LED control unit
for monitoring flashing lights
12/24 Volt
Input 5-pin bayonet male
Output 5-pin bayonet female
Product number:
014001112
LED control unit
for monitoring flashing lights
12/24 Volt
Input open end
Output open end
Product number:
014001113